Supermicro SUPERSERVER 6013L-8, User Manual

Page: 43 / 108

Chapter 5: Advanced Motherboard Setup
5-9
5-6 Adding PCI Cards
1. PCI slots:
The X5DLR-8G2+ has one 64-bit 133 MHz PCI-X slot for a full-length
(standard size) PCI card. The 64-bit 133 MHz PCI-X slot should have a
riser card installed, which can accept one standard sized PCI card (see
Figure 5-6).
2. PCI card installation:
Before installing a PCI add-on card, see step 1, above. Begin by swing-
ing the release tab on the PCI slot shield out to the left for the PCI slot.
Insert the PCI card into the slot on the riser card, pushing down with
your thumbs evenly on both sides of the card. Finish by pushing the
release tab back to its original (locked) position. Follow this procedure
whenever adding or removing a card from the slot.