Supermicro SUPERSERVER 6011L, User Manual, Page: 62 / 112

6-6
S
UPER
S
ERVER
6011L
Manual
Figure 6-5. Removing SCSI Drives
2. Installing/removing hot-swap SCSI drives:
One SCSI drive bay is located in the front of the chassis, making it easily
accessible for installation and removal. The SCSI drive is a hot-swap
unit, meaning that it can be installed and removed while the system is
running. To remove a SCSI drive, first push the release button located
beside the drive's LEDs, then swing the colored handle fully out and use
it to pull the unit straight out (see Figure 6-5).
!
Important: The SCSI drive carrier must remain in the
drive bay to maintain proper airflow.
Release Button
Handle