Supermicro SUPERSERVER 6011L, User Manual, Page: 45 / 112

Chapter 5: Advanced Motherboard Setup
5-11
P3TDLR Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear (p. 5-19) Pins 1-2 (Normal)
JP1 SCSI (p. 5-20) Pins 1-2 (Enabled)
JP2 Front Side Bus Speed (p. 5-18) Pins 1-2 (Auto)
JP7 Overheat Alarm (p. 5-19) Closed (Enabled)
JP8 NIC1 Enable/Disable (p. 5-19) Open (Enabled)
JP11 Power Supply Fail (p. 5-12) Pin 4 (Reset)
JP12 Power Supply Fail (p. 5-12) Closed (Enabled)
JP13 Speed for 64-bit PCI (5-18) Closed (33 MHz)
JP24 NIC2 Enable/Disable (p. 5-19) Open (Enabled)
JP62 Onboard VGA (p. 5-20) Pins 1-2 (Enabled)
J210 Watchdog Reset (p. 5-20) Open (Enabled)
DIP Switches Description Default Setting
SW1 (1-4) CPU Core/Bus Ratio (see p. 5-17)
Connectors Description
ATX Power 24-pin ATX Power Connector (p. 5-12)
DIMM0-DIMM3 Memory (SDRAM) Slots (p. 5-10)
COM1/2 COM1/COM2 Serial Port Connector (p. 5-15)
CPU FAN (2 ea) CPU1/CPU2 Fan Header (p. 5-15)
Fan Headers (5 ea) Chassis, thermal and blower (p. 5-15)
J23/J24
IDE Hard Disk Drive 1/2 Connectors (p. 5-21)
J26 Floppy Disk Drive Connector (p. 5-21)
J28 PS/2 Keyboard/Mouse (p. 5-10)
J105/106 USB3/USB4 (p. 5-16)
JA1 Ultra160 LVD SCSI Connector (p. 5-22)
JF1 Front Control Panel (p. 5-4)
JP61 PWR_LED (p. 5-4)
NIC1/2 Ethernet Ports 1/2 (p. 5-16)
SLED1 SCSI LED header (p. 5-16)
USB 1/2 Universal Serial Bus 1/2 Ports (p. 5-16)
WOL Wake-on-LAN Header (p. 5-17)
WOM Wake-on-Modem Header (p. 5-17)