14
Chapter 1: Introduction
Quick Reference
Jumper
Description
Default Setting
JBM1
IPMI Share LAN Enable/Disable
Pins 1-2 Open (Enabled)
JBT1
CMOS Clear
Open (Normal)
JPME2
Manufacturing Mode
Pins 1-2 (Normal)
JPO1
CPU Throttle When PWR_Fail
Pins 2-3 (Disabled)
JPT1
Onboard TPM 2.0 Enable/Disable
Pins 1-2 (Enabled)
JVRM1
VRM SMB Clock (to BMC or PCH)
Pins 1-2 (BMC Normal)
JWD1
Watchdog Timer
Pins 1-2 (Reset)
Connector
Description
BT1
Onboard Battery
I-SATA6
SATA 3.0 Port
J2
MicroLP PCIe 4.0 x8 Slot for AOM-BPN-MC12SN
J5
PCIe 4.0 x8 Slot
J6
M.2 PCIe 4.0 x4/SATA 3.0 Key-M (2280/22110)
JKVM1
VGA/COM1/USB Connector on the I/O Backplane
JSD1
SATA DOM Power Connector
JTPM1
Trusted Platform Module/Port 80 Connector
JUIDB1
UID Switch
SW1
Power Button
USB1/2 (JKVM1)
Back Panel USB 2.0 Ports via JKVM1
USB3/4 (JUSB3P1)
Back Panel USB 3.2 Type C Connector
USB5 (JUSB1)
USB 3.0 Type A (Debug only)
VGA
VGA Port via JKVM1
LED
Description
State: Status
LED2
Unit Identifier LED
Solid Blue: Unit Identified
LEDM1
BMC Heartbeat LED
Blinking Green: BMC Normal
