Supermicro SUPERSERVER 5018A-TN7B, User Manual

Page: 53 / 122

Chapter 5: Advanced Motherboard Setup
5-11
NIC6/NIC7 (LAN6/LAN7)
The NIC (Network Interface Controller)
LED connection for LAN ports 6 and
7 are located on pins 11 and 12 and
pins 9 and 10 of JF1, respectively.
Attach NIC LED cables to the NIC6
and NIC7 LED indicators to display
network activity. Refer to the table on
the right for pin definitions.
Unit ID LED (Front Panel)
Connect an LED cable to pins 7
and 8 of Front Control Panel to use
the Overheat/Fan Fail and UID LED
connections These functions are
described in Chapter 3; more UID
description in Section 5-10.
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin definitions.
Power LED
Pin Definitions (JF1)
Pin# Definition
15 +5V
16 Ground
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable here to indicate the status of
HDD-related activities. See the table
on the right for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 3.3 V Stby
14 HDD LED
HDD LED
Status
State Definition
Off No Activity
Blinking HDD Busy
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
OH/Fan Fail/ PWR Fail/Blue_
UID LED Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 Overheat/Fan Fail
LAN6/LAN7 LED
Pin Definitions (JF1)
Pin# Definition
9/11 3.3V Standby
10/12 NIC Activity LED