Supermicro SUPERSERVER 5018A-TN7B, User Manual

Page: 101 / 122

Chapter 7: AMI BIOS
7-21
Load Onboard LAN Option ROM
Select Enabled to enable the onboard LAN1 Option ROM~LAN5 or LAN7 Option
ROM. This is to boot the computer using a network device. The default setting for
LAN1 Option ROM is
Enabled , and the default settings for the other LAN option
ROMs Option are Disabled .

ACPI Settings
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support for
the Windows 2008 (or a later version) operating system. The options are
Enabled
and Disabled.

Super IO Configuration
Super IO Chip AST2400
 Serial Port 1 Configuration /Serial Port 2 Configuration
This submenu allows the user the configure settings of Serial Port 1 or Serial Port 2.
Serial Port
Select Enabled to enable the a selected onboard serial port. The options are En-
abled and Disabled.
Device Settings
This item displays the status of a serial part specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address
of a serial port specified by the user. Select
Auto to allow the BIOS to automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are
Auto , (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
The options for Serial Port 2 are
Auto , (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Device Mode
Use this feature to set the optimal setting for a super I/O device. The options are
24MHz/13 and 24MHz.