Supermicro SUPERSERVER 5016i-URF, User Manual

Page: 71 / 116

Chapter 5: Advanced Motherboard Setup
5-23
LAN Port Enable/Disable
Use JPL1/JPL2 to enable or disable
LAN Port 1 and LAN Port 2 on the
motherboard. See the table on the right
for jumper settings. The default setting
is enabled.
LAN Port Enable
Jumper Settings
Pin# Defi nition
1-2 Enabled (default)
2-3 Disabled
SBX1 Slot Confi guration Select
SBX1 select (J32) allows you to select
between a PCI-E x16 or a PCI-E x8+x8
confi guration on the SBX1 slot.
SBX1 Slot Confi guration Select
Jumper Settings
Both Jumpers Defi nition
Pins 1-2 PCIE x16 (Default)
Pins 2-3 PCIE x8 + x8
USB Wake-Up
Use the JPUSB1 jumper to "wake-up"
your system by pressing a key on a USB
keyboard or clicking the USB mouse. The
JPUSB1 jumper is used together with
the USB Wake-Up feature in the BIOS.
Enable this jumper and the USB feature
in the BIOS to wake-up your system via
USB devices.
USB Wake-up
Jumper Settings
Pin# Defi nition
1-2 Enabled (Default)
2-3 Disabled
BMC Jumper (JPB)
JPB is used to enable or disable the BMC
(Baseboard Management Control) Chip
and the onboard IPMI connection. This
jumper is used together with the IPMI set-
tings in the BIOS. The default position is
on pins 1 and 2 to Enable BMC. See the
table on the right for jumper settings.
BMC IPMI Enable/Disable
Jumper Settings
Settings Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled