Supermicro SUPERSERVER 5016i-URF, User Manual

Page: 11 / 116

1-3
Chapter 1: Introduction
Graphics Controller
The X8SIU-F features an integrated ATI video controller based on the Matrox
G200eW graphics chip, which has 16 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The 5016i-URF is built upon the SC815TQ-R450UBP chassis. The following is a
general outline of the main features of this chassis.
System Power
The SC815TQ-R450UBP features a redundant 450W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
SATA Subsystem
The SC815TQ-R450UBP chassis was designed to support four hot-swap SATA
hard drives.
Note: a UIO SAS controller card is required to support SAS drives.
PCI Expansion Slots
A riser card on the right side of the chassis (RSC-R1UU-E8R+) can support one
PCI-E 2.0 x8 card (with a maximum length of 5.6"). The left side riser card (RSC-
R1UU-UE8) supports a UIO card or one PCI-E 2.0 x16 card. See our web site for
details (http://www.supermicro.com/products/nfo/UIO.cfm).
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (two) and UID/overheat/fan
fail/power fail. A main power button and system reset button is also included.