7-12
S
UPER
S
ERVER 5013C-M8 User's Manual
Hyper-Threading Technology
Select "Enabled" to activate the hyper-threading function of the CPU(s) to make
each CPU appear as if there were two CPUs to any programs that support it (you
must have OS support also). The settings are "Disabled" and "
Enabled
."
CPU Clock Ratio
Key in a number between 8x to 50x to set the clock ratio of the processor. The
default setting is
8x.
(8x is only available for retail CPUs.)
Spread Spectrum
Spread Spectrum is a technique used to stablize a system by reducing the
level of ElectroMagnetic Interference. The options are "Enabled" and
"
Disabled
".
CPU Clock
Key in a number between 100 and 233 to set the CPU clock (MHz).
Supermicro does not recommend or make any guarantees with CPU
overclocking. The default setting is
"200 MHz"
.
Limit CPUID MaxVal
This feature allows the user to set a limit for the CPUID Maximum Value. The
value can be set from 1 to 3. The options are "Enabled" and
"Disabled"
. (For
Windows XP, this setting should be set to "Disabled.")
7-4.7 Processor & Clock Options
Summary of Contents for SuperServer 5013C-M8
