51
Chapter 3: Maintenance and Component Installation
To Install M.2 SSDs and the Carrier Card
Caution:
Use industry-standard anti-static equipment, such as gloves or wrist strap, and
follow precautions to avoid damage caused by ESD.
1.
For each SSD, install the standoff in the appropriate hole that corresponds with the form
factor of the SSD to be installed (42mm, 60mm or 80mm length SSDs are supported).
Push the plastic standoff until it snaps into the carrier card.
Figure 3-10. M.2 SSD Add-on Card (AOC-SMG3-2H8M2-B)
Figure 3-11. Inserting the Standoff
(drawing shows hole for 60 mm SSD)
Installing M.2 Solid State Drives
Each node can accommodate one or two M.2 solid state drives (SSDs).
•
HNR, HNC0R, and HNC1R models support two M.2 SSDs using an optional carrier card
(AOC-SMG3-2H8M2-B).
•
HNTR model supports one SSD on the standard card, BPN-ADP-6SATA3H4-1UB.
•
HTR model does not support M.2.
Note:
The system only supports SATA M.2 SSDs with operating temperature specification
rated 70C or higher, and NVMe M.2 SSDs with operating specification rated at least 80C or
higher.
SSD Socket
SSD Socket
BAR CODE
A21
A15
A1
68
67
58
2
1
74
75
68
67
58
2
1
74
75
B33
B70
B1
B32
3
2
1
1 2 3
AOC-SMG3-2H8M2-B
REV:1.00
DESIGNED IN USA
MH1
MH4
MH10
MH9
MH8
MH7
MH5
MH2
L2
JF2
J3
J2
CL14
R8
60mm
60mm
80mm
40mm
80mm
40mm
M.2-HC2
M.2-HC1
Hole for Standoffs
(choose one)
Hole for Standoffs
(choose one)
