Supermicro SUPERSERVER 2028TP-HC0R-SIOM, User Manual

Page: 8 / 80

1-2 1-3
Chapter 1: Introduction SUPERSERVER 2028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL
1-2 Serverboard Features
At the heart of the SuperServer 2028TP-HTR/HC0R/HC1R-SIOM
lies the X10DRT-PS, a dual processor serverboard based on the Intel®
PCH C612 chipset and designed to provide maximum performance. Four of these
serverboards can be mounted in the -R2K04BP2 chassis.
The sections below cover the main features of the X10DRT-PS serverboard (see
Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRT-PS supports single or dual Intel® Xeon® E5-2600 v3/v4 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors (www.supermicro.
com).
Memory
The X10DRT-PS has sixteen DIMM slots supporting up to 2 TB of LRDIMM (Load
Reduced DIMM) or 1 TB of RDIMM (Registered DIMM) DDR4-2400/2133/1866 MHz
registered ECC memory. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SAS
The 2028TP-HC0R-SIOM includes an LSI 3008 controller to support six SAS3 hard
drives per node. (RAID 0, 1, 5, 6, 10, 50 and 60 supported).
The 2028TP-HC1R-SIOM includes an LSI 3108 controller to support six SAS3 hard
drives per node. (RAID 0, 1, 5, 6, 10, 50 and 60 supported).
The SAS drives are hot-swappable units.
SATA
The 2028TP-HTR-SIOM uses a controller integrated into the PCH C612 chipset to
support six SAS3 hard drives per node. (RAID 0, 1, 5, 6, 10, 50 and 60 supported).
The SATA drives are hot-swappable units.
PCI Expansion Slots
The 2028TP-HTR/HC0R/HC1R-SIOM can support two PCI-E 3.0 expansion cards
in each node. Expansion cards are mounted on riser cards. The RSC-R1UTP-E16R
riser supports a single PCI-E 3.0 x16 card on the right side of the system (when
viewed from the rear) and the RSC-P-6 riser supports one PCI-E 3.0 x16 card on
the left side of the chassis.
I/O Ports
Each of the four X10DRT-PS serverboards in the system include two USB 3.0 ports,
an IPMI LAN port and a VGA port.
In addition, the 2028TP-HTR/HC0R/HC1R-SIOM was designed to accept one of four
different SIOM modules (Supermicro I/O Module) to satisfy the specific I/O functions
required by the system. The various SIOM modules are as follows:
AOC-MGP-i2: two RJ45 (1GbE) ports supported by an Intel® i350-AM2 controller.
AOC-MGP-i4: four RJ45 (1GbE) ports supported by an Intel i350-AM4 controller.
AOC-MTGN-i2S: two SFP+ (10GbE) ports supported by an Intel 82599ES controller.
AOC-MTGN-i4S: four SFP+ (10GbE) ports supported by an Intel XL710-BM1
controller.
Note:
For IPMI configuration instructions, please refer to the Embedded BMC
Configuration User's Guide available at http://www.supermicro.com/support/
manuals/.
Graphics Controller
The X10DRT-PS features an integrated ASpeed 2400 BMC with an integrated
VGA/2D graphics controller.