manualshive.com logo in svg

Supermicro SuperServer 1029GQ-TNRT, User Manual, Page: 9 / 144

Share
Download
Supermicro SuperServer 1029GQ-TNRT User Manual Download Page 9

9

Chapter 1: Introduction

1.2 Unpacking the System

Inspect the box in which the SuperServer 1029GQ-T(N/X/V)RT was shipped and note if it 

was damaged in any way. If any equipment appears damaged, file a damage claim with the 

carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated 
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and 

electromagnetic fields are generated. It will also require a grounded AC power outlet nearby. 

Be sure to read the precautions and considerations noted in Appendix B.

In addition to the motherboard and chassis, several important parts that are included with 
the system are listed below.

Main Parts List

Description

Part Number

Quantity

LAN Add-on Card

AOM-PIO-I2XT-P

1

Air Shroud

MCP-310-11807-0B

1

CPU Heatsinks

SNK-P0067PS

2

Fans (4-cm)

FAN-0163L4

9 (1029GQ-TRT, 1029GQ-TNRT)

7 (1029GQ-TXRT, 1029GQ-TVRT)

Hot-swap Carriers (for 2.5" HDDs)

MCP-220-00047-0B

2

Rackmount Rail Kit

MCP-290-11809

1

Summary of Contents for SuperServer 1029GQ-TNRT

















































































































































Reviews:

No comments