manualshive.com logo in svg

Supermicro SuperServer 1029GQ-TNRT, User Manual, Page: 105 / 144

Share
Download
Supermicro SuperServer 1029GQ-TNRT User Manual Download Page 105

Chapter 6:  BIOS

105

When the item above -"Boot Mode Select" is set to Legacy, the following items will be display 

for configuration:

• 

Boot Option  #1 - Boot Option #7

When the item above -"Boot Mode Select" is set to UEFI, the following items will be display 

for configuration:

• 

Boot Option #1 - Boot Option #8

Delete Boot Option

This feature allows the user to select a boot device to delete from the boot priority list.

Delete Boot Option

Use this item to remove an EFI boot option from the boot priority list.

Delete Driver Option 

This feature allows the user to add a new boot option to the boot priority features for your 
system.

UEFI Application Boot Priorities

This feature sets the system boot order of detected devices.

• 

Boot Option #1

NETWORK Drive BBS Priorities

This feature sets the system boot order of detected devices.

• 

Boot Option #1

• 

Boot Option #2

Summary of Contents for SuperServer 1029GQ-TNRT

















































































































































Reviews:

No comments