Chapter 2: Server Installation
23
MCP-290-11809-0N
Press
* Original setting
* Round cylinder
674 mm to 1048 mm
Rear
Front
Inner Rail
Outer Rail
Middle Rail
Figure 2-1. Identifying the Inner Rails, Middle Rails and Outer Rails
(Right rail shown)
2.3 Installing the Rails
This section provides information on installing the chassis into a rack unit with the rails
provided. There are a variety of rack units on the market, which may mean that the assembly
procedure will differ slightly from the instructions provided. You should also refer to the
installation instructions that came with the rack unit you are using.
Note:
This rail will fit a
rack between 27" and 32" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of three sections: an inner rail that secures directly to the chassis, an outer rail that
secures to the rack, and a middle rail that slides in the outer rail. These assemblies are
specifically designed for the left and right side of the chassis.