SuperServer 1029GP-TR User's Manual
20
Warning:
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Figure 2-1. Identifying the Rail Sections
2.3 Installing the Rails
This section provides information on installing the chassis into a rack unit with the rails
provided. There are a variety of rack units on the market, which may mean that the assembly
procedure will differ slightly from the instructions provided. You should also refer to the
installation instructions that came with the rack unit you are using.
Note:
This rail will fit a rack between 27" and 32" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two sets of rack rails, one set for the right side of the chassis
and one for the left.
Outer Rails: slide together
Inner Rail: pre-attached
to the chassis
Front and Rear Brackets:
attach to the rack
