SuperServer 1029GP-TR User's Manual
24
Note:
Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Figure 2-5. Installing the System into a Telco Rack
Installing the Server into a Telco Rack
Optional brackets are needed to install the server to a telco (open type) rack.
To install the server into a Telco type rack, use the two L-shaped brackets on either side of
the chassis (four total).
1. Determine how far follow the server will extend out the front of the rack. Larger chassis
should be positioned to balance the weight between front and back.
2. If a bezel is included on your server, remove it.
3. Attach the two front brackets to each side of the chassis, then the two rear brackets
positioned with just enough space to accommodate the width of the telco rack.
4. Finish by sliding the chassis into the rack and tightening the brackets to the rack.
