Supermicro SUPERSERVER 1028R-TDW, User Manual

Page: 50 / 76

WIT.RU
WIT Company – поставка серверов, СХД,
сетевого оборудования, лицензионного ПО
6-8
SUPERSERVER 1028R-TDW USER'S MANUAL
6-5 Power Supply
The SUPERSERVER 1028R-TDW has a single 600 watt power supply, which is
auto-switching capable. This enables it to automatically sense and operate with a
100V to 240V input voltage.
Power Supply Failure
If the power supply module fails, the system will shut down and you will need to
replace the module. Replacements can be ordered directly from Supermicro (see
contact information in the Preface). As there is only one power supply module in
the server, power must be completely removed before removing and replacing the
power supply for whatever reason.
Replacing the Power Supply
1. First turn the power switch on the control panel off, then unplug the power
cord from the system. Replace with the same model, which can be ordered
directly from Supermicro.
2. Detach the wiring from the power supply.
3. Remove the screws that secure the power supply to the chassis then pull the
module straight out.
4. Carefully insert the new power supply into the open bay and push it
completely into the system.
5. Reconnect the power supply wiring.
6. Secure it to the chassis with the screw you removed previously, then
reconnect the AC power cord and press the power button on the control panel
to restart the system.
Figure 6-6. Removing/Replacing the Power Supply