Supermicro SUPERSERVER 1025W-U, User Manual

Page: 43 / 112

Chapter 5: Advanced Serverboard Setup
5-9
5-6 PCI Expansion Cards
Two riser cards are used to support add-on cards to the system. The chassis can
accommodate one standard size (full height full length) and one low-profi le PCI
expansion card (up to 5.5" long) in addition to a UIO card. When viewed from the
chassis front, the standard size card installs to the left and the low-profi le card
installs to the right side.
PCI cards are installed into riser cards that have been pre-installed to the system.
See confi guration list below.
Installing a PCI Expansion Card
Confi rm that you have the correct riser card for your chassis model and the 1.
add-on card includes a standard bracket.
Remove the chassis cover. 2.
Install the riser card by sliding card into the appropriate riser card in the moth- 3.
erboard. For more information, see the riser card installation instructions.
Choose the PCI slot shield in which to place the add-on card. 4.
In that slot, open the PCI slot shield lever and slide the shield sideways. 5.
From inside the chassis, remove the PCI slot shield. 6.
Slide the add-on card into the riser card and attach the add-on card bracket 7.
in place of the PCI slot shield.
Secure the add-on card by closing the PCI slot shield lever. 8.
Connect cables to the add-on card as necessary. 9.
PCI Slot/Card Confi gurations
Right Side Riser Card Expansion card supported
RSC-R1UU-E8R+ 1x low-profi le PCI-Express x8 card
Left Side Riser Card Expansion cards supported
CSE-R1UU-UE8 1x PCI-E x8 card + UIO card