Supermicro SUPERSERVER 1025TC-10G, User Manual

Page: 53 / 104

Chapter 5: Advanced Serverboard Setup
5-19
5-11 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gb LAN port, one LED indicates
activity when blinking while the other
LED may be green, amber or off to
indicate the speed of the connection.
See the table on the right for the func-
tions associated with the connection
speed LED.
LAN LED
(Connection Speed Indicator)
LED Color Defi nition
Off No connection or
10 MHz
Green 100 MHz
Amber 1 GHz
Onboard Power LED Indicator
(LED3)
LED Color Defi nition
Green (Solid) Power On, System
On
Green (fl ashing
quickly) ACPI S1 State
Green (fl ashing
slowly) ACPI S3 (STR) State
Off Power: Off, power
cable: not connected
Onboard Power LED (LED3)
There is an Onboard Power LED (LE3)
located near JF1. When the green light
is on or fl ashing, the power is connected.
Unplug the power cable before removing
and changing any components. See the
table on the right for indications.
10 Gb LAN LED
(LED2)
Color Status Defi nition
Green Blinking 10 Gb LAN Active
Green Solid 10 Gb LAN Connected
Yellow Blinking Gb LAN Active
Yellow Solid Gb LAN Connected
10 Gb LAN LED Indicator (LED2)
A LED indicator for the 10 Gb LAN port
(LED2) is located near this port. This
LED shows the status of the 10 Gb LAN
port. Refer to the table on the right for
indications.