Supermicro SUPERSERVER 1025TC-10G, User Manual

Page: 43 / 104

Chapter 5: Advanced Serverboard Setup
5-9
To Install: Insert module vertically and press down until it snaps into place. Pay attention to the bottom
notches.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from the slot.
Figure 5-3. DIMM Installation
Note: Notch
should align
with its
receptive point
on the slot
Notch
Notch
Release
Tab
Release
Tab
Possible System Memory Allocation & Availability
System Device Size Physical Memory Remaining
(Available)
(3 GB Total System Memory) Physical Memory Remaining
(Available)
(4 GB Total System Memory)
Firmware Hub
fl ash memory
(System BIOS) 1 MB 3.00 3.99
Local APIC 4 KB 3.00 3.99
Area Reserved
for the chipset 2 MB 3.00 3.99
I/O APIC (4
Kbytes) 4 KB 3.00 3.99
PCI Enumeration
Area 1 256 MB 3.00 3.76
PCI Express (256
MB) 256 MB 3.00 3.51
PCI Enumeration
Area 2 (if needed)
-Aligned on 256-
MB boundary- 512 MB 3.00 3.01
VGA Memory 16 MB 2.85 2.85
TSEG 1 MB 2.84 2.84
Memory available
to OS & other
applications 2.84 2.84