Supermicro SUPERSERVER 1025TC-10G, User Manual

Page: 101 / 104

C-1
Appendix C: System Specifi cations
Appendix C
System Specifi cations
Note: unless otherwise noted, specs apply to a complete system (both server-
boards).
Processors
Four Intel® Xeon® 5400/5300/5200/5100 Series processors in LGA771 sockets
Note: please refer to our website for details on supported processors.
Chipset
Intel 5100/ICH9R
BIOS
Phoenix BIOS in 16 Mb Flash EEPROM (each serverboard)
Memory Capacity
Twelve DIMM slots to support a maximum up to 96 GB of registered ECC DDR2-
667/533 SDRAM (48 GB per node)
Note: interleaved memory requires DIMMs to be installed in pairs - refer to Section 5-6 for details.
Serial ATA Controller
Intel ICH9R on-chip controller to support eight 3 Gb/s Serial ATA [RAID 0, 1, 5
(Windows only) and 10]
SATA Drive Bays
Eight hot-swap drive bays to house eight standard SATA drives
PCI Expansion
Two low-profi le PCI-Express x16 slots (with pre-installed riser cards)
Serverboard
1025TC-T: X7DCT
1025TC-10G: X7DCT-10G
Dimensions (both): 6.5 x 16.4 in (165 x 417 mm)
Chassis
SC809T-780B (1U Rackmount)
Dimensions: (WxHxD) 17.2 x 1.7 x 27.75 in. (437 x 43 x 705 mm)