Supermicro SUPERSERVER 1018R-WC0R, User Manual

Page: 34 / 76

Chapter 5: Advanced Serverboard Setup
5-9 5-8
S
UPER
S
ERVER 1018R-WC0R User's Manual
Memory Support
The X10SRW-F supports up to 1 TB of ECC 3DS LRDIMM (Load-Reduced DIMMs),
512 GB of ECC LRDIMM or up to 256 GB of ECC RDIMM (Registered DIMM)
DDR4-2400/2133/1600/1333 memory in eight DIMM sockets.
DIMM Installation
Installing Memory Modules
1. Insert the desired number of DIMMs into the memory slots starting with
DIMMA1. See the Memory Installation Tables below.
2. Insert each DIMM module vertically into its slot. Pay attention to the notch
along the bottom of the module to avoid installing incorrectly (see Figure 5-4).
3. Use your thumbs to gently press down on both ends of the DIMM module
until it snaps into place in the slot. Repeat for all modules.
4. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Caution! Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
5-5 Installing Memory
Figure 5-4. DIMM Installation
DIMM Module Population Table
Follow the table below when installing memory.
Socket Key
Populating RDIMM/LRDIMM DDR4 Memory Modules
Type
Ranks
Per DIMM
and Data
Width
DIMM Capacity
(GB)
Speed (MT/s); Voltage (V); Slots per Channel (SPC) and
DIMMs per Channel (DPC)
2 Slots per Channel
1 DPC 2 DPC
E5-2600 V3 E5-2600 V4 E5-2600 V3 E5-2600 V4
4 Gb 8 Gb 1.2 V 1.2 V 1.2 V 1.2 V
RDIMM SRx4 8 GB 16 GB 2133 2400 1866 2133
RDIMM SRx8 4 GB 8 GB 2133 2400 1866 2133
RDIMM DRx8 8 GB 16 GB 2133 2400 1866 2133
RDIMM DRx4 16 GB 32 GB 2133 2400 1866 2133
LRDIMM QRx4 32 GB 64 GB 2133 2400 2133 2400
LRDIMM 3DS 8Rx4 64 GB 128 GB 2133 2400 2133 2400