Chapter 6: Advanced Chassis Setup
6-7
Insert the new drive unit in the slot until the tab locks in place.
5.
Reconnect the data and power cables.
6.
Replace the chassis cover (replace the server in the rack, if necessary) and
7.
power up the system.
Figure 6-5. Installing the DVD-ROM Drive
Drive Screw
Drive Screws
Mini Bezel Lock Screw
6-5 Power
Supply
The SuperServer 1015B-3 has a single 560 watt power supply, which is auto-
switching capable. Power must be removed from the system when replacing the
power supply.
Power Supply Failure
If the power supply module fails, the system will shut down and you will need to
replace the module. Replacements can be ordered directly from Supermicro (see
contact information in the Preface).
As there is only one power supply module in the system, power must be com-
pletely removed from the server before removing and replacing the power supply
for whatever reason.
Summary of Contents for SUPERSERVER 1015B-M3
