Supermicro SUPERSERVER 1015B-M3, User Manual

Page: 14 / 98

1-4
S
UPER
S
ERVER 1015B-M3 User's Manual
1-3 Server Chassis Features
The following is a general outline of the main features of the SC113MTS-560C
chassis.
System Power
When confi gured as a SuperServer 1015B-M3, the SC113MTS-560C chassis in-
cludes a single 560W power supply.
SAS/SATA Subsystem
For the 1015B-M3, the SC113MTS-560C chassis was designed to support four
SAS or SATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SAS drives (there is no system support for SATA drives).
Control Panel
The SC113MTS-560C control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activ-
ity and a UID (Universal Information) LED. Also present are a main power button,
a system reset button and a UID button.
I/O Backplane
The SC113MTS-560C is a short-depth, 1U rackmount chassis. Its I/O backplane
provides three PCI slots, one COM port (the other is internal), one VGA port, two
USB ports, PS/2 mouse and keyboard ports, two Ethernet (LAN) ports and a UID
LED.
Cooling System
The SC113MTS-560C chassis' revolutionary cooling design has been optimized to
provide suffi cient cooling for dual CPU confi gurations. The chassis includes four
4-cm counter-rotating PWM (Pulse Width Modulated) fans located in the middle of
the system. There is a "Fan Speed Control Mode" in BIOS that allows chassis fan
speed to be determined by system temperature.