Chapter 4: BIOS
4-17
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
Select Yes and press <Enter> to clear all DMI event logs. The options are Yes
and
No
.
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. This setting can also be
Disabled
.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and
115.2K
.
Console Type
This item allows you to set console redirection type. The options are VT100,
VT100/8bit, PC-ANSI/7bit,
PC ANSI
, VT100+, VT-UTF8 and ASCII.
Flow Control
This item allows you to select the flow control option for the console. The options
are: None, XON/XOFF, and
CTS/RTS
.
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct
or Via Modem.
Continue CR after POST
Select on to continue with console redirection after the POST routine. The options
are On and
Off
.
