Supermicro Supero SUPERSERVER 5086B-TRF, User Manual

Page: 94 / 106

7-26
S
UPER
S
ERVER 5086B-TRF User's Manual
FRB-2 Timer Timeout
This feature allows the user to select the timeout value (between 3 minutes to 6
minutes) for an FRB-2 Timer, beyond which the activities in an FRB-2 timer will be
terminated. The options are 3 Minutes, 4 Minutes, 5 Minutes, and
6 Minutes .
FRB-2 Timer Policy
This feature allows the user to decide how the system shall respond after an FRB-2
timeout. This feature is not available when the FRB-2 Timer is disabled. The options
are Do Nothing, Power Down and
Reset .
X System Event Log
Enabling/Disabling Options
Use this feature to enable or disable the following System Event Log (SEL) set-
tings.
SEL Components
Select Enabled to support all features of System Event Logging (SEL) during bootup.
The options are Enabled and
Disabled .
Erasing Settings
This feature allows the user to decide when to erase a System Event Log.
Erase SEL
Select Yes to erase all System Event Logs. The options are Yes and No .
When SEL is Full
This feature allows the user to decide what the system shall do when the System
Event Log is full. This feature is not available when the FRB-2 Timer is disabled.
The options are
Do Nothing , Power Down and Reset.
Custom EFI Logging Options
Use this feature to customize the settings of Extensible_Firmware_Interface (EFI)
Logging between an operation system and the system platform
fi rmware.
Log EFI Status Codes
Select Both to record the microcodes for both OS and the system platform fi rmware
during EFI logging. The default setting is Both .
Note: Be sure to reboot the computer for all the changes on the setting
indicated above to take effect.