5-4
S
UPER
S
ERVER 5086B-TRF User's Manual
If needed, apply a thin layer of
1.
thermal grease to the CPU.
Place the heatsink on top of the
2.
CPU so that the two mounting
holes on the heatsink are aligned
with those on the retention
mechanism.
Installing a CPU Heatsink to the CPU
Installing a CPU to the CPU Board
The CPU board bracket that the CPU board is attached to does not present a
fl
at
surface for installing CPUs and memory. For this reason, you should lay the board
either on a smaller support surface or on the edge of the table so that the board
bracket handles do not touch the surface the board bracket is resting on.
Press the socket clip down to
1.
unlock it. Gently lift the socket
clip to open the load plate.
Align the CPU key with the
2.
socket key.
Align CPU Pin 1 against socket
3.
pin 1. Once they are aligned,
lower the CPU down to the
socket.
Once the CPU is fully seated on
4.
the socket, press the socket clip
down to lock it.
Do not rub the CPU pins against the socket, which may damage the CPU
socket.
1
2
CPU Key
!
Summary of Contents for Supero SUPERSERVER 5086B-TRF
