Supermicro SUPERO SuperServer 1018L-MP, User Manual, Page: 84 / 104

7-14
SUPERSERVER 1018L-MP User's Manual
is set to Disabled, the PCI-E ASPM will be programmed before OpROM. The
options are
Enabled
and Disabled.
SLOT1 PCI-E 2.0 X16 ASPM (X10SLV only)
SLOT1 PCI-E 3.0 X16 ASPM (X10SLV-Q only)
Use this feature to set the ASPM (Active State Power Management) level for
the graphics device installed on a PCI-E or PCI slot specified by the user. The
options are Disabled, ASPM L0s, ASPM L1, ASPM L0sL1, and Auto .
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on
the SA (System Agent) side of the DMI Link. The options are Disabled, L0s,
L1 and
L0sL1 .
PCH DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on
the device installed on the DMI Link supported by the PCH chip. The options
are Disabled and
Enabled .

Memory Configuration
This item displays the following information on the memory modules installed
on the motherboard.
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
Memory Voltage
•
DIMM A1
•
DIMM B1
•
CAS Latency (tCL)
•
Minimum Delay Time
•
CAS to RAS (tRCDmin)
•
Row Precharge (tRPmin)
•
Active to Precharege (tRASmin)
Memory Frequency Limiter
This feature limits the frequency on which the system memory operates. The
settings are
Auto , 1067, 1333, and 1600.