Supermicro SUPERO SuperServer 1018L-MP, User Manual, Page: 66 / 104

6-4
SUPERSERVER 1018L-MP User's Manual
Installing the Hard Drive
The motherboard should be installed before installing the hard drive.
1. Make sure there is no power to the system as described in section 6-1 and
remove the chassis cover.
2. Remove the two screws securing the hard drive tray to the support bracket and
set them aside for later use. Lift the tray out.
3. Place the hard drive into the tray and secure it to the tray with the screws
provided with hard drive.
4. Return the hard drive tray assembly into the chassis, aligning the tabs of the
tray with the slots in the chassis. Secure the tray to the chassis support bracket
with the screws previously set aside.
5. Reinstall the chassis cover and power up the system.
6-4 Installing the Hard Drive
The SC101i uses a fixed 2.5" hard drive. It is installed into a mounting tray.
Figure 6-4. Installing the Hard Drive