Supermicro SUPERO SuperServer 1018L-MP, User Manual

Page: 63 / 104

Chapter 6: Advanced Chassis Setup
6-1
Chapter 6
Advanced Chassis Setup
This chapter covers the steps required to install or replace components in the
chassis. The only tool required is a Phillips screwdriver.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 2 and the warning/
precautions listed in the setup instructions
6-1 Removing the Power Cord
Before performing most setup or maintenance tasks, use the following procedure
to ensure that power has been disconnected from the system.
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut down, remove the power adapter cord
from the back of the chassis.
3. Disconnect the cord from the power strip or wall outlet.