4-10
H8SME-F SERVERBOARD USER'S MANUAL
PCI/PnP Confi guration
Clear NVRAM
Select Yes to clear NVRAM during boot-up. The options are Yes and
No
.
Plug & Play O/S
Select Yes to allow the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select
No
to allow AMIBIOS to confi gure all devices in the system.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value
to set the PCI latency in PCI clock cycles. Options are 32,
64
, 96, 128, 160,
192, 224 and 248.
PCI IDE Busmaster
Use this setting to
Enable
or Disable BIOS enabled uses of PCI Busmastering
for reading or writing to IDE drives.
ROM Scan Ordering
This setting determines which kind of option ROM activates prior to another.
Options include
Onboard First
and Addon First.
LP PCIe x8 Slot
These settings
Enable
or Disable the specifi ed PCIE slot in your system.
Boots Graphic Adapter Priority
This option specifi es the graphic adapter priority for Onboard VGA or
Offboard
VGA
.
SuperIO Device Confi guration
Serial 1 Address
This option specifi es the base I/O port address and Interrupt Request address
of serial port 1. Select
"Disabled" to prevent the serial port from accessing any
system resources. When this option is set to
Disabled
, the serial port physically
becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its
I/O port address and IRQ 4 for the interrupt address. Options include Disabled,
3F8/IRQ4
, 3E8/IRQ4 and 2E8/IRQ3
