Supermicro SUPERO H8DGT-H User Manual Download Page 50

Page: 50 / 70

4-4

H8DGT-H/HF/HIBQ/HIBQF Serverboard User’s Manual

Secure Virtual Machine Mode

This setting is used to

Enable

or Disable SVM.

Power Now

This setting is used to

Enable

or Disable the AMD Power Now feature.

Power Cap

This option can decide the highest P-state in the OS. Options include

P-state

through P-state 4.

ACPI SRAT Table

This option

Enables

or Disables the building of the ACPI SRAT Table.

CPU Down Core

This option sets down core support for the CPU. Options include

Disabled

, 2

Cores through 10 Cores in even numbered increments.

C1E Support

This option

Enables

or Disables C1E support.

Clock Speed Spectrum

This option enables or

disables

spread spectrum modulation.

Advanced Chipset Control Confi guration

NorthBridge Confi guration

Memory Confi guration

Bank Interleaving

Select Auto to automatically enable a bank-interleaving memory scheme

when this function is supported by the processor. The options are

Auto

and Disabled.

Node Interleaving

This option enables node memory interleaving. Options include Auto or

Disabled

Summary of Contents for SUPERO H8DGT-H







































































Search results

Summary of Contents for SUPERO H8DGT-H

Reviews:

Related manuals for SUPERO H8DGT-H

Brands by name

Popular brands

Supermicro SUPERO H8DGT-H, User Manual

Search results

Summary of Contents for SUPERO H8DGT-H

Reviews:

Related manuals for SUPERO H8DGT-H

Brands by name

Popular brands