4-6
H8DGT-H/HF/HIBQ/HIBQF Serverboard User’s Manual
OHCI/EHCI HC Device Functions
These settings allow you to either
Enable
or Disable functions for OHCI or EHCI
bus devices.
USB 2.0 Controller Mode
Use this setting to confi gure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include
Enabled
(Hi-Speed Mode)
or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy support
if there are no USB devices installed in the system. "Auto" disabled Legacy
support if no USB devices are connected. The options are Disabled, Enabled
and
Auto
.
IDE Confi guration
On Chip SATA Channel
This setting allows you to
Enable
or Disable the OnChip SATA channel.
On Chip SATA Type
Use this setting to set the On Chip SATA type. Options include
Native IDE, RAID,
AMD_AHCI
and Legacy IDE.
SATA IDE Combined Mode
This setting allows you to
Enable
or Disable the SATA IDE combined mode.
PATA Channel Confi guration
This allows you to set PATA channel confi guration. Options include
SATA as
Primary
or SATA as secondary.
Primary/Secondary/Third/Fourth IDE Master/Slave
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. The options are Disabled and
Auto
.
Summary of Contents for SUPERO H8DGT-H
