9
Chapter 1: Introduction
1.3 Blade Module Features
The table below lists the main features of the SBI-6119R-C3N/T3N SuperBlade module. See
the proceeding section for components typically included in a blade system and other optional
components. Specific details for the SBI-6119R-C3N/T3N blade module are found in Chapter
3: "Blade Module Features".
SBI-6119R-C3N/T3N
SuperBlade Modules Specification Features
Specification
Description
Mainboard
B11SRE-CPU (proprietary form factor)
Processors
Single Intel™ Xeon® W 2100 series Socket R4 LGA 2066 processor for each node.
Please refer to our website for a complete listing of supported processors.
UPI Speed
UPI up to 10.4 GT/s
Chipset
One Intel C422 chip set
Graphics Controller
Integrated Aspeed AST2500 VGA graphics chip for each node
BIOS
32 Mb SPI Flash EEPROM with AMI® BIOS for each node
Memory Capacity
Supports up to 512 GB RDIMM/LRDIMM DDR4 2666 MHz speed and 8 GB, 16 GB,
32 GB, 64 GB and 128 GB size SDRAM memory in eight 288-pin DIMM sockets. See
https://www.supermicro.com/support/resources/memory/X11_memory_config_guide.pdf
for details.
Hard Drive Bays
SBI-6119R-C3N: two NVMe and one SAS3/SATA3 drive or three SAS3/SATA3
SBI-6119R-T3N: three NVMe/SATA3
Add-on Cards
The SBI-6119R-C3N/T3N blade modules can use optional add-on cards for a TPM
security module, Intel VROC RAID card or a Hardware RSTe key upgrade module.
System Weight
10.5 lbs (4.76 kg)
System Dimensions
(HxWxD): 9.75 x 1.75 x 23.5" (247 x 44.45 x 596.9-mm)
Processors
The SBI-6119R-C3N/T3N SuperBlade module supports a single Intel Xeon W-2100 series,
Socket R4 LGA 2066 series processor.
Refer to the Supermicro website for a complete listing of supported processors (
supermicro.com/products/superblade
). Please note that you will need to check the detailed
specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-6119R-C3N/T3N SuperBlade module are
found in Chapter 2: "Setup and Installation".
Memory
The SBI-6119R-C3N/T3N SuperBlade module has eight 288-pin DIMM sockets that can support
up to 512 GB RDIMM/LRDIMM DDR4 2666 MHz speed, 8 GB, 16 GB, 32 GB and 64 GB size
memory per node. Memory is interleaved, which requires modules of the same size and speed
to be installed in groups (of two or three).
