Supermicro SC847E1C Series, User Manual

Page: 52 / 128

SC847E1C/2C JBOD Chassis Manual
4-14
4-7 Installing the Power Card
Figure 4-19: Installing the CSE-PTJBOD-CB3 Power Card into the Chassis
Removing the Power Card From the Chassis
1. Power down the system and remove the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 4-2 of this
manual.
2. Remove the four screws securing the power card to the chassis.
3. Lift the power card up and out of the chassis.
Installing the Power Card into the Chassis
4. Power down the system and remove the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 4-2 of this
manual.
5. Place the CSE-PTJBOD-CB3 power card into the chassis as illustrated
above.
6. Secure the power card to the chassis using the four screws provided.
7. Plug the power cords into the rear of the power supply, replace the chassis
cover and power up the system.