Supermicro SC847E1C Series, User Manual

Page: 115 / 128

E-9
Appendix E: CSE-PTJBOD-CB3 Power Board Specifications
E-8 SC847D JBOD Cabling
E16 I
2
C Cabling
Use the following diagram to connect the CSE-PTJBOD-CB3 to the front and rear
backplanes in SC847D JBOD E16 model chassis.
CSE-PTJBOD-CB3
Rear Expander
BPN-EXP-847DF3EL1
Front Expander
BPN-EXP-847DF3EL1
CBL-0157L, 40 cm
CBL-0157L-01, 60 cm
Figure E-4: E16 I
2
C Cabling
J4 J6
Jumper Settings
Jumper Setting
JP5
Pins 1-2: SAS3 enabled
Pins 2-3: SAS2 enabled and SC847
When enabling SAS2/SAS3 functionality, use connectors JP1-JP4, (see Page 2-4)
and set the JP5 jumper to pins 1-2 (SAS3) or pins 3-4 (SAS2).
When an SC847D chassis is being used, use connectors J4-J7 (see Page 2-4) and
set the JP5 jumper to pins 2-3.