Supermicro SC847E1C Series, User Manual

Page: 48 / 128

SC847E1C/2C JBOD Chassis Manual
4-10
4-6 Removing and Installing the Backplanes
The SC847E1C/2C chassis comes equipped with a BPN-SAS3-846EL1/EL2 front
backplane and a BPN-SAS3-826EL1/EL2 rear backplane. For detailed infomation
and instructions on how to change the backplane settings, see Appendices C and
D of this manual.
Removing the Front Backplane
1. Power down the system and remove the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 4-2.
2. Remove the two side screws securing the front backplane to the chassis.
3. Remove the four horizontal screws along the top of the front backplane.
4. Remove the five horizontal screws that go through the bottom of the back -
plane.
Figure 4-11: Removing the Screws Securing the Front Backplane
Figure 4-12: Removing the Front Backplane
1
2
1
4
1
3
5. Lift the front backplane up and out of the chassis.