4-15
Chapter 4: Setup and Installation
4-7 Add-on Card/Expansion Slot Setup
Figure 4-18: Removing the Add-on Card Slot screw
SC828 chassis includes seven slots for add-on cards and expansion cards.
Installing an Add-on or Expansion card:
Confirm that each add on card you are installing includes a standard L-
1.
bracket.
Disconnect the power supply and lay the chassis on a flat surface. If you
2.
have not done so, open the chassis cover.
Remove the screw holding the slot cover in place for each slot you want to
3.
use. Keep this screw for later use.
Connect the add-on cards and/or expansion cards to the mother board. Fol-
4.
low add-on card manufacturer's instructions.
Secure each card to the chassis using the card's L-bracket and the screw
5.
previously removed.
L-Brackets
Add-on/Expansion Card
Add-on/Expansion
Card Slots
