manualshive.com logo in svg

Racal Instruments 1264C, User Manual, Page: 1 / 102

Share
Download
Racal Instruments 1264C User Manual Download Page 1

6-SLOT VXIbus MAINFRAME 

USER MANUAL

 

 

 
 

MODEL 1264C 

 

PUBLICATION NO. 980827 

 

RACAL INSTRUMENTS 

 

United States 

 

(Corporate Headquarters and Service Center) 

4 Goodyear Street, Irvine, CA 92618 

Tel:  (800) 722-2528, (949) 859-8999; Fax: (949) 859-7139 

 

5730 Northwest Parkway Suite 700, San Antonio, TX 78249 

Tel:  (210) 699-6799; Fax:  (210) 699-8857 

 

Europe 

 

(European Headquarters and Service Center) 

18 Avenue Dutartre, 78150 LeChesnay, France 

Tel:  +33 (0)1 39 23 22 22;  Fax: +33 (0)1 39 23 22 25 

 

29-31 Cobham Road, Wimborne, Dorset BH21 7PF, United Kingdom 

Tel:  +44 (0) 1202 872800; Fax:  +44 (0) 1202 870810 

 

Via Milazzo 25, 20092 Cinisello B, Milan, Italy 

Tel:  +39 (0)2 6123 901; Fax:  +39 (0)2 6129 3606 

 

Racal Instruments Group Limited, Technologie Park, D-51429 Bergisch Gladbach 

Tel: +49 2204 844205; Fax: +49 2204 844219 

 

[email protected]

 

[email protected]

 

[email protected]

 

http://www.racalinstruments.com

 

[email protected]

 

www.racalinstruments.de

 

 

PUBLICATION DATE: February 24, 2003 

Copyright 1998 by Racal Instruments, Inc. Printed in the United States of America. All rights reserved. 

This book or parts thereof may not be reproduced in any form without written permission of the publisher. 

Summary of Contents for 1264C







































































































Reviews:

No comments