Supermicro SBI-7127RG-E, User Manual

Page: 48 / 86

SBI-7127RG-E Blade Server Module User’s Manual
3-18
Notes
6. The completed Front blade assembly will have the GPU cards connected to the
retention brackets and to the riser card’s PCI-E connectors for the completed
assembly (
Figure 3-20 ).
7. (Optional) Install the SATA DOM module and its associated power cable before
replacing the front assembly back on the blade module at this time. See
"Hard Disk
Drives" on page 4-8 for details.
8. Reattach the front blade assembly back into the blade module. Resecure it with its
fourteen (14) retaining screws and screw the two retention bracket screws to the
GPUs and the serverboard (see
step 2. on page 3-15 ).
9. Install the two GPU card power cables for each GPU card. One end attaches to the
GPU card’s 8-pin socket, the other end attaches to the power socket on the blade
module’s serverboard.
10. Replace the top cover and secure it with its one retention screw (see Figure 3-16 ).
Figure 3-20. Re-attach I/O Plates