2-18
SUPER P5MMA98/P5MMS98/P5MMA2/P5MMS2 User's Manual
2-1-6 Peripheral Setup
OnBoard FDC
This option enables the FDC (Floppy Drive Controller) on the
motherboard. The settings are Auto (AMIBIOS automatically deter-
mines if the floppy controller should be enabled), Enabled, or Dis-
abled. The Optimal and Fail-Safe default settings are Auto.
OnBoard Serial Port A
This option specifies the base I/O port address of serial port 1. The
settings are Auto (AMIBIOS automatically determines the correct
base I/O port address), Disabled, 3F8h, 2F8h, 2E8h, or 3E8h. The
Optimal and Fail-Safe default settings are Auto.
OnBoard Serial Port B
This option specifies the base I/O port address of serial port 2. The
settings are Auto (AMIBIOS automatically determines the correct
base I/O port address), Disabled, 3F8h, 2F8h, 2E8h, or 3E8h. The
Optimal and Fail-Safe default settings are Auto.
IR Port Support
Use this feature to enable or disable support for infrared. The set-
tings for this option are Enabled or Disabled. The Optimal and
Fail-Safe default settings are Disabled.
IR Mode Select
The infrared functions provide a point-to-point (or multipoint-to-
multipoint) wireless communications. They support several infra-
red protocols including SIR, ASKIR, FIR, or CIR. The Optimal and
Fail-Safe default settings are SIR.
