2-13
Chapter 2: Running Setup
Standby Timeout (Minute)
This option specifies the length of a period of system inactivity while
in full power on state. When this length of time expires, the com-
puter enters standby power state. The settings are Disabled and 4
minute intervals. The Optimal and Fail-Safe default settings are
Disabled.
Suspend Timeout (Minute)
This option specifies the length of a period of system inactivity while
in standby state. When this length of time expires, the computer
enters suspend power state. The settings are Disabled and 4
minute intervals. The Optimal and Fail-Safe default settings are
Disabled.
Slow Clock Ratio
The value of the slow clock ratio indicates the percentage of time
the STPCLK# signal is asserted while in the thermal throttle mode.
The settings are 0-12.5%, 12.5-25%, 25-37.5%, 37.5%-50%, 50%-
62.5%, 62.5-75%, and 75%-87.5%. The Optimal and Fail-Safe de-
fault settings are 50%-62.5%.
Display Activity
This option specifies if AMIBIOS is to monitor display activity for
power conservation purposes. When this option is set to Monitor
and there is no display activity for the length of time specified in the
Standby Timeout (Minute) option, the computer enters a power sav-
ings state. The settings are Monitor or Ignore. The Optimal and
Fail-Safe default settings are Ignore.
