Supermicro L2/L3 Switches Configuration Guide
6
1
System Configuration Guide
This document describes the system features supported in Supermicro Layer 2/Layer 3 switch products.
This document covers the system configurations for the below listed Supermicro switch products.
The majority of this document applies to all the above listed Supermicro switch products. In any
particular sub section however, the contents might vary across these switch product models. In those
sections the differences are clearly identified with reference to particular switch product models. If any
particular switch product model is not referenced, the reader can safely assume that the content is
applicable to all the above listed models.
Throughout this document, the common term “switch” refers to any of the above listed
Supermicro switch product models unless a particular switch product model is noted.
1.1
Management IP
Supermicro switches come with a default static management IP address of 192.168.100.102. In TOR
switches, the management IP address is assigned to a default VLAN 1 interface. The management IP is
accessible through all the switching ports by default.
In blade switches, the management IP address is assigned to the internal management Ethernet ports
connected to the CMM. Hence the management IP address is reachable through the CMM Ethernet
connection. This management IP address is not reachable through front panel 1Gb or 10Gb ports. To
Top of Rack Switches
• SSE-G24-TG4
• SSE-G48-TG4
• SSE-X24S
• SSE-X3348S
• SSE-X3348T
Blade Switches
• SBM-GEM-X2C
• SBM-GEM-X2C+
• SBM-GEM-X3S+
• SBM-XEM-X10SM
