11
FatTwin F619P2-RT/RTN/RC0/RC1 User's Manual
1.4 System Features
The following table provides you with an overview of the main features of the
F619P2-RT/RTN/RC0/RC1. Please refer to Appendix C for additional specifications.
System Features
Motherboard
X11DPFR-S/SN
Chassis
F418BC2-R2K20BP
CPU
Dual Intel® Xeon® Scalable processors which offer 2 UPI (UltraPath Interconnect) of up to 10.4GT/s
Note:
Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers.
Refer to the block diagram on page 16 to determine which slots or devices may be affected.
Socket Type
Socket P
Memory
Integrated memory controller supports up to 1536 GB of ECC Load Reduced DIMM (LRDIMM), Registered
DIMM (RDIMM), and Non-Volatile DIMM (NV-DIMM) DDR4 (288-pin) 2666/2400/2133 Mhz modules in
twelve (12) slots
Chipset
Intel C621 chipset
Expansion Slots
•
One (1) PCI-Express 3.0 x16 slots supported by CPU1
•
One (1) PCI-Express 3.0 x16 (x8 + x8) SMCI storage Slot (JSXB2)
•
One (1) PCI-Express 3.0 x16 SIOM LAN Port
Hard Drives
Each node has six (6) 2.5" drive bays. Each model uses different types of drives for their system as follows:
•
F619P2-RT: Up to six (6) SATA3 HDD/SSD drives
•
F619P2-RTN: Up to six (6) SATA3, or two (2) SATA3 with up to four (4) NVMe drives
•
F619P2-RC0/F619P2-RC1: Up to six (6) SAS3/SATA3 (optional NVME)
Power
Four 2200 Watt redundant power supplies
Cooling
Up to three (3) 4-cm cooling fans for each of the system's eight serverboard nodes
MB Form Factor
Proprietary: (LxW): 9.66" x 8.53" (216.66 mm x 499.36 mm)
Dimensions
Chassis dimensions: (WxHxD) 17.63 x 6.96 x 29 in. (448 x 177 x 737 mm)
