56
FatTwin F619P2/3-FT User's Manual
TPM/Port 80 Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80 card,
which is available from Supermicro. A TPM/Port 80 module is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the hard drive is not installed in the system.
RAID Key Header
A RAID Key header is located at JRK1 on the motherboard. The RAID key is used to support
NVMe SDD.
Intel RAID Key
Pin Definitions
Pin#
Definition
1
Ground
2
3.3V Standby
3
Ground
4
PCH RAID Key
4-pin BMC External I
2
C Header
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect a cable to this
header to use the IPMB I
2
C connection on your system. See the table below for pin definitions.
External I
2
C Header
Pin Definitions
Pin#
Definition
1
Data
2
Ground
3
Clock
4
No Connection
I-SATA 3.0 and S-SATA 3.0 Ports
Two (I-SATA) connectors and one S-SATA connector, supported by Intel PCH, are located on
the motherboard. The two (I-)SATA connectors provide eight SATA 3.0 connections (I-SATA
0-3, 4-7), while the S-SATA connector provides four S-SATA 3.0 (S-SATA 0-3) connections.
