Chapter 4: UEFI BIOS
105
Erase SEL (Available when the item: SEL Components is set to Enabled)
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are
No,
Yes, On next reset,
and Yes, On every reset.
When SEL is Full (Available when the item: SEL Components is set to Enabled)
This feature allows the user to specify what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are
Do Nothing
and Erase Immediately.
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are
No
and Yes. The following items will be displayed:
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover
.
•
IPMI Network Link Status: This item displays the IPMI Network Link status. The default
setting is
Dedicated LAN
.
•
Configuration Address Source: This feature displays the source of the current IPMI LAN
address. The default setting is
DHCP (Dynamic Host Configuration Protocol)
.
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
•
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
VLAN: Select Enabled to enable IPMI VLAN support. The options are Enabled and
Dis-
abled
.
*If the item "Update IPMI LAN Configuration" is set to Yes, the following items will display:
IPMI LAN Selection
Use this feature to select the type of the IPMI LAN. The options are Dedicated, Shared,
and
Failover
.
