FatTwin F619P2/3-FT User's Manual
35
Figure 3-10. Assembling the PCI-E Slot Bracket and Riser Card
Assembling the PCI-E Slot Bracket Assembly
Each node supports two expansion cards in front of the node. Each expansion card must be
plugged into a riser card, which in turn plugs into the motherboard.
Assembling the PCI-E Slot Bracket Assembly
1. Remove the node from the chassis and remove the cover from the node as described
previously in this section.
2. Open the PCI-E slot clip and remove the PCI-E slot shield. (See the illustration on the
previous page)
3. Remove the tool-less PCI-E slot bracket.
Expansion Card
PCI-E Slot
Bracket
Card Mounting
Screws
4. Lift the PCI-E slot bracket out of the node.
