61
Chapter 3: Maintenance and Component Installation
Figure 3-15. Installing the AIOM Module
Installing an AIOM Module
Each node in the system has one front mounted AIOM module, which adds various I/O ports to
the node depending upon the module selected. To install a module, use the procedure below.
Installing an AIOM module
1.
Remove the AIOM bracket by unscrewing two screws, one on the side of the node tray,
one underneath.
2.
Remove one screw securing the AIOM I/O shield.
3.
Install any AIOM into the bracket, and securing the AIOM by tightening the two built-in
screws on the AIOM.
4.
Install the assembled AIOM bracket into the node tray, and tightening the two screws
used in step 1.
