17
16
SuperServer E100-9APP User's Manual
Chapter 2: Maintenance and Component Installation
Chapter 2
Maintenance and Component Installation
This chapter provides instructions on installing and replacing main system components. To
prevent compatibility issues, only use components that match the specifications and/or part
numbers given.
Installation or replacement of most components require that power first be removed from the
system. Please follow the procedures given in each section.
2.1 Removing Power
Use the following procedure to ensure that power has been removed from the system. This
step is necessary when removing or installing non-hot-swap components or when replacing
a non-redundant power supply.
1. Use the operating system to power down the system.
2. After the system has completely shut down, disconnect the AC adapter power cord from
the power source.
3. Disconnect the power cord from the chassis.
2.2 Accessing the System
The E101 features a removable bottom cover to access to the inside of the chassis.
Removing the Bottom Cover
1. Power down the system as described in section 2.1.
2. Remove the eight screws that hold the cover in place.
3. Lift the cover up and off the chassis.
Caution:
Except for short periods of time, do
not
operate the server without the cover in
place. The chassis cover must be in place to prevent misuse
.
Figure 2-1. Removing the Chassis Cover
2
2
2
2
2
2
2
2
3
