Supermicro AS-1020P-8R, User Manual

Page: 78 / 104

7-6
AS1020P-T(R)/1020P-8(R) User's Manual
KBC Clock Source
The options for the KBC clock source are 8 MHz, 12 MHz and 16 MHz.
Restore on AC Power Loss
This setting allows you to choose how the system will react when power returns after
an unexpected loss of power. The options are Power Off and Last State .
Watch Dog Timer
This setting is used to enable or disabled the Watch Dog Timer function. It must
be used in conjunction with the Watch Dog jumper (see Chapter 2). Options
are Disabled and Enabled.
S-ATA Confi guration
HT-1000 S-ATA
Use this setting to Enable or Disable the on-chip SATA controller.
Port# to Boot From
Use this setting to select which port to boot from. Options are Port0 , Port1,
Port2 and Port3.
S-ATA Mode
Use this select either IDE or MMIO as the SATA mode.
Banner Display
This setting is used to Enable or Disable the banner display.
INT13 Support
This setting is used to Enable or Disable the INT13 function.
ACPI Confi guration
Advanced ACPI Confi guration
ACPI Version Features
Select which version of ACPI you wish to use. Options are ACPI v. 1.0 , ACPI
v. 2.0 and ACPI v. 3.0.